Hey bud, Iif you want to chat with me more directly we use an app called Threema, it's secure and about $4


In any rate, we shouldn't be removing yard signs off of private property, so the idea itself should not even be on paper.

That depends, I don't think that format is necessarily approved for activism. What would you paint on it?


Plus you got this new guy and so far he sounds good. Interviewers we’re so excited they DM’d me before his interview was even done.

Clarke and Jack are now banned from any activism with network 8 until they give you a hand.


I need to hear from the rest of you if you've already sorted your car out or not

Francis PA and Alexander PA can either go together or solo depending on what works for them


A little bigger than a piece of printing paper


Of course we don't steal them. No one in our network would ever break the law.


@all please indicate you have received and read above messages by reacting with :PF-Flag: please remember we are working against the clock and have 10 days left to prepare.


quick question for you, once I've completed some do they just go in the "completed" folder or do they need to be in one of the 1-9 folders


also, do the ones in the (1) folder still need to be edited


Thursday is better, but is he going to be around because of the holiday?

@PF-188861 Can you get over to Victor's Thursday night instead?


I'm usually not off work till 6 or later and I work most weekends I've done a few while I'm traveling for work but being in a company vehicle and uniform makes me pretty easy to pick out

Have you considered doing daytime activism?


Just making sure I have everything I need for the demo I'm on a shield team my shinguards just arrived today should have everything I need except my patches


I ordered them with my promat a while back and still haven't gotten anything


Any clue where we're going is it gonna be OK if I ride with you


Yep but i plan to do that during the day Friday. Will your group be there yet? Sometimes you guys arrive in the middle of the night.

You will need to visit camp at some point to deliver and exchange supplies, right?


I've seen signs like these on public property too. It's less common, but they exist. I just wanted to bring the idea up to Henry.

I'm not really joking. I've given my opinion, which is just that. You can do with it what you want.


You will have between 6 a.m. and 12 noon to visit camp on Saturday, does no time within work?


I won't know until damn near the day before


If that is the only way then sure. I was planning on getting  hotel super close to the event location, renting a bike and being there most of the morning. See what changes and who comes / goes.


Ideally, you swing by early just after or at Roll Call at 6 a.m. I assumed you'd have a rental car and that would be emergency transport in case anyone had a medical emergency and needed to be transported from the march.

If no police at 9am, then like hundreds at 11am then something has changed.


Yea, we've had two. One was kicked out for being a glow nigger, the other dropped out after the Bradley incident. If it's the younger one, hes welcome back in.


After a re-vetting to make sure it's the right one of course.


You’re not ducking out. You have other things going on. It’s okay.


Hey man. I just wanted to send a heads up to leadership. I have reason to believe that a former PF member is currently a federal informant.

I've known him for a while online, and met him in Philly for the I-day march. And he randomly left every mutual chat, quit PF, and lost contact with everyone who knew him online.

I found him making vague fedposts elsewhere, asked him about it, and he began making statements in vague support of violence.

Later, with the terror attack in Waukesha, he started making things a bit more explicit and asking me if my opinion on collective white violence had changed.

Just wanted leadership to be aware of this and know that this is who it is so you can keep everyone safe.


Another problem there. They have discontinued 1-way rentals. Or they want $1200+ for 4 days. It is insanity. But i will have my truck nearby.


I thought you were flying. If you have any vehicle present that is more than enough.


I have to deliver a car to NC. It has turned into one of the most F'd up plans i have had to do. But i promised to do it and i am gonna get the damn car there no matter what. So we are taking 2 cars down, and coming back with 1. Painful.


Canceling 1 way rentals is crazyland. But 3 of 4 companies have done it and the other wants to rape you on price.


So 2x the gas, 2x the tolls one way for us.


Anyway Wolf will be along too, maybe i can drop him off at camp in the morning if you can use him for something. He can't drive a truck but can do anything else.


Mason VT re-interviewed last night , I was sent notes. Are we allowing him back already? I think it would be good for him and us. We will need to be ruthless if he becomes incommunicative and isolated again.

Tyler and I will talk about this, we'll see if it also benefits others to do so


So sure i will head up to camp on Sat. morning at 6:30ish.


Correction.  I will be at camp at 6:30am.

No i am not gonna meet you guys. I am going to be down at the location scouting in the morning until you guys arrive.


I messaged Vincent a confirmation.  We wi be good to go.


Here is the rough timetable of the day. Camp is 1.5hrs from the city.


Plus you got this new guy and so far he sounds good. Interviewers we’re so excited they DM’d me before his interview was even done.


Ok. I may get a hotel closer to camp then or just camp. Since i found out i have to bring my truck yesterday because of this rental stuff, i can pack a ton more stuff. I will talk to wolf and see what he wants to do.


I won't know until damn near the day before


Are there showers at this camp? (not a holocaust joke)?


There's a field, a forest, and some port-a-toilets.


I’ll move those out of the folder when we catch up

also, do the ones in the (1) folder still need to be edited


you just upload them to the completed folder. The 1-9 is for the photo coordinator to do


Hello, you are being contacted because you are based and redpilled. Please message me when you have met with the interviewee. Interview notes:
Interviewee-781927
20/OR/Portland
11/21/21
Conductor: William TX
Notetaker: Jason NY

Accepted

Test Q: What do you expect will be asked? Questions about background, ideology and personal behavior.

-- Applicant Information --

Personal Transportation: Yes

Permanent Resident: Yes

Political Ideology: National Socialist

Drug Abuse: No

Religion: Irreligious, no problem working w/ religious people.

Why Join: Has been "pretty active in the movement" since he was 15. Has heard about us for a while but did not look into us until a friend of his who works for Media2Rise told him about us. Was convinced to get involved after learning that we have a decent presence in Oregon. "You guys are the only group out there putting in the time and effort to do activism."

Skills: Coordinator, dependable, botany, farming, outdoorsman, CPR certified

Read Manifesto: Yes. Believes our ideas are unique compared to other nationalist groups in America. Our focus on American patriotism is unique and makes sense.

-- In-depth Questions --

Q1: Has never interviewed in this process before.

Q2: Has not been charged w/ any crimes. No govt employment.

Q3: No restricting ailments.

Q4: Ideological journey involved growing up in a left-leaning environment. He observed his city becoming more dangerous due to immigration and drug abuse. In highschool he had negative interactions with non-Whites. He was a racial minority in his school and received racially targetted abuse from non-Whites. He was interested in learning about the origins of the demographic shift and he discovered National Socialist ideology from there.

Q5: First heard about PF on Telegram. Seeing our activism and hearing about us from his friend in Media2Rise is what pushed him to want to join. He felt that our activism is actually effective in comparison to other nationalist groups in America. The Philadelphia demonstration, in particular, left a big impact on him. Seeing activism posts from Oregon on Telegram was another big factor towards him joining.

Q6: Is familiar with Civic Nationalism, disagrees with it. "People make up a nation." You must have a shared culture and ethnicity to be a part of a nation. Signing immigration documents cannot make you an American.

Q7: Family has been in America for 3 generations. They originate from France and Switzerland. Describes self ethnically as Western European.

Q8: Has not been a member of any group. Has had friends who were members of groups including Media2Rise. Has many likeminded friends, some family. He wants to get involved in activism to make tangible changes in the world, improve the future of his descendants.

Q9: Violence is justified when somebody uses violence against you. If he was accosted while putting up promat he would not use violence unless he was physically attacked. He prefers de-escalation. Understands and agrees w/ violence statement.

Q10: Last physical confrontation was a brawl in highschool.

Q11: Works Wednesay to Friday. "Pretty available for the most part." Can attend weekly meetings.

Q12: Mostly gets his news and information from Telegram channels like DiscloseTV, Media2Rise. If there was a breaking news event that he wanted information from he would talk to his friends about it or he'd listen to the radio in his car.

Q13: If he had to put a label on his beliefs he would choose Racialist or National Socialist. His primary belief is that the American continent belongs exclusively to the White race. Life experiences which influenced his beliefs were witnessing the demographic changes in his hometown and experiencing racial abuse in school.
Q14: No conflict between his religious and political beliefs.

Q15: Books that he has read are Mein Kampf, Siege and some academic studies. Mein Kampf taught him about Hitler's principles, personal life and the foundational beliefs of National Socialism. Siege had useful information about how to stay safe while engaging in activism but he disliked and disavows any talk of violence. He has read many academic studies in order to affirm and improve his understanding racial science.

Q16: Fitness is above average. Works out 6 days a week, walks and runs a lot. Does not like to sit still, very active in the outdoors. Hiking, camping, backbacking. Lifts weights. Trained formally in boxing for 6 years. Also trained in MMA and Muoy Thai. 6'1" 215lbs.

Q17: Ideal family structure is nuclear family. Father should work, mother should stay home and care for children. Modern family has too much divorce, parents are not involved enough with the children. Personal upbringing was similar to ideal.

Q18: American historical figure who he admires most is Theodore Roosevelt because he was an explorer, embodied the American spirit, created national parks, was adventurous.

Q19: Figure who he despises is LBJ for allowing the start of white


Questions to ask the interviewee (feel free to add pre existing ones to this list)

Introduce yourself by asking him “Hello are you interviewee (insert number here)? My name is “name and state”

Never approve of his answers or make him feel like he’s saying anything correct. Don’t spoon feed him answers. Let him get to answers himself. It’s not a conversation it’s an interview.

-Ask him personal questions like what he likes to do for fun. That’s a good opener.

-What was your “redpill” moment. When did you start thinking the way you do?

-When did you realize democracy has it’s flaws?

-Ask him things about the movement only our guys would know.

-Trust your gut feelings about the guy. Step away and deliberate answers with the guy.

-If he’s a deny, walk back to him and say “We enjoyed your questions and answers we are going to send it back to the interview team to deliberate and we will let you know the verdict” then tell the interviewers he was a deny and they will delete his account.


Do you want to join Kyle and I for some stickering tonight?


I've seen signs like these on public property too. It's less common, but they exist. I just wanted to bring the idea up to Henry.


Understandable man. The photo is good overall, but it took me nearly an hour to fix it up and get it to look like this.

I'm usually not off work till 6 or later and I work most weekends I've done a few while I'm traveling for work but being in a company vehicle and uniform makes me pretty easy to pick out


I have a tip to help both of us. Find a place to put a sticker that gives it good lighting even if the spot isn't that good for people to see in real life. One clear, well-lit photo, will make the editing process go by in a matter of minutes. Otherwise keep up the good work, I'm really liking the activity in WV


We are having a meeting with the AL and GA guys tonight at 9pm EST on mumble regarding travel for the 4th. If you need help setting up mumble let me know


Yea, I would know which one it is if I see them.


nterviewee: 466311
30/CA/San Jose (permres)
Date: 11/23/21
Conductor: SamMN
Notes: JasonTX

Result: ON HOLD UNTIL CONFIRMATION

Test: How long ago did you send in the app? several months ago yet got new creds to join on the server
Transport: yes
Pol. Ideo.: traditional, conservative, racially aware. economically libertarian. socially hard-rightwing
Drugs: no
Rel: protestant, no issues working with those of other religions.
Why join: has two kids, things are bad enough in the country, does not want his kids growing up in a situation worse than this. survival of our culture and race. leftwing propaganda bs is screwing us over. so much corruption in the system. federal reserve, banking system, critical race theory, victimhood.
Skills: EMT-1 liscense, First Aid, Martial Arts (Jui Jitsu), hiking,
Manifesto: what resonated the most was how decadent the culture is today. morally we accepted this baseline of "shit". doesn't want his kids to live in a "brownie, socailist" state.

yes, he was a member of the california network around the election timeframe.

Gabriel CA, NW11

first time rejoining the org

first eval was similar to this

HenryCA, PaulCA, BradleyCA

was in the org 18 months, since mid 2019

Henry put him in charge of running the sparring sessions

Rocketchat and Mumble

for the nation against the state, QR code,

PaulCA, HenryCA, BradleyCA, CHarlesCA

offered a security contract at the same time when he couldn't get on the mumble servers. it was dark for a week. had no choice but to leave 6 months for the contract. recently returned, and put in the app.

participation was high, only real challenge were the logistics, lots of people spread out

won't take another 6month contract overseas

left the miltary in 2014

wil maintain a constistent style of commitment

he needs to be here, the next 5-10 year period is crucial


I fixed the America First stencil and split it up into sections. Those are in the mega now.

I have similar issues. Sometimes a few lines of the white don't stick, I slowed the printing speed down a lot for that first white layer, and that helped a little bit.


Just keep me posted brother. I'd love to have you with us, however it's important you get these items in time.


Yea, that looks a bit suspect. The "good" Gabriel was still in the military when he was with us.


[ ](https://pf3618.bloodandsoil.org/group/nw16?msg=LW3CH2DBXqA5G4d4Q) I assume we are linking up with them on the 4th? Or do you mean the third?


would you be comfortable meeting up with him?


Yea, we can arrange with Paul CA to come as well. He knew the "good" Gabriel too.


sounds good man. Ironically enough it seems like both of them were ex-military with extensive combat skills


Indeed. We'll know him when we see him though. So hes in the Interview server as 466311?


regarding Gabriel CA, Josh CA seems to think this is the "good" Gabe. He intends to meet up with him along with Paul CA just to confirm

interviewers

Norwegian, Irish, Anglo, and Assyrian? This man's a world traveler just by going through his own BS.


Copy that, I'll reach out to him and Paul to set up a vetting ASAP.


He should message him on the vetting server to confirm which gabe it is


Do you have all your required equipment? Chin strap and all?


Not to sound like an ass but why is that I was the first to message Paul and Josh CA about this inquiry? Despite not even doing his interview, it's not a big deal given that I am a part of the team but when we do stuff like this it needs to be handled ASAP. Otherwise it will be forgotten.


Hey Paul, it looks like one of the Gabriel's re-applied. I'm going to check with work to see when my next available day off is, and I'd like you to come with for his vetting. If it's the glow nigger then we just bounce rather than risk confrontation. I dont want to have a bunch of guys come just in case it's the glow nigger.

No my cousin is getting married on that Saturday


I’ll be in Oregon city if they want to meet up near me for the interview and put up stickers, but I won’t have time to go all the way into the city.

@all would anyone be willing to go down to Portland this weekend to meetup with @PF-269823 and interview this new guy? Maybe throw up 4 posters?


@PF-983004 what time will you be available


Are we doing enough? At the end of the day have we fully exerted our strengths towards achieving our purpose or are we lying to ourselves?


I usually carry a microfiber cloth with me. You can also sticker the backside. Don’t sweat it. Unless it’s out of focus, too dark, etc I post pictures even if I’m unhappy with them. Let the photo editors decide what’s post worthy, not our job. You did great.

I did post 5 for that one though, in hopes the rest would make it. I shouldn’t have even sent that in and just left it at 4.


Nice. I’ll check it out when I get home from work

I fixed the America First stencil and split it up into sections. Those are in the mega now.


Thursday or Saturday. Later might be better but I’m flexible


I will let the person who took notes for his interview answer that


I know we all get busy and I'm not trying to call anyone out in particular, I just hope you understand my point. When we over look these things, good people that could greatly benefit this org are forgotten.


Ok so Action report for this week is I had a goal of 4 places to promat and I met that goal.  I stickered in Woonsocket, RI , Providence, RI , Tiverton, RI and Lincoln, RI. My goal for this upcoming week will be 4 as well. I also ran a mile yesterday. I finished both books, A New Nobility of Blood and Soil by Walther Darré and Popular Government by Henry Sumner Maine. I am waiting for 2 new books to come in that I plan on starting as soon as they do. I didn't attend last weekends meet up unfortunately but I plan to attend our Thanksgiving one this weekend! I will also be repairing the blower in my car tonight as well. Me and my wife wrote a letter to Chris Cantwell in prison to encourage him at the trial. I also spoke with him in the phone a few days ago and he is doing well. The trial was unfortunate not the ideal outcome for our guys. But that's ok they can't stop what we have started anyway. I will make it to the meeting tonight but I will bit be talking because I litteraly have no voice right now.


I have room for four others. I'd really prefer to ride with someone else if necessary, as I just missed a whole bunch of work due to having covid and finances are extremely tight right now.

I need to hear from the rest of you if you've already sorted your car out or not


Hello Lawrence, hope you’re doing well. I had to work all day today, so I didn’t have time to take the test today. We had such an unexpected overwhelming amount of customers today unlike ever before that I wasn’t able to leave until 4:15, and the DMVs close at 5 PM. But I already finished going over the cheat guide yesterday, so I’m finally ready to take the test. Since I’m off this Friday, I’m going straight to the DMV to take the computer test. I’ll send you a picture of the permit once they give it to me. Have a Happy Thanksgiving 🦃🍁🍽!

Oh snap I thought it was on December! Okay, now I’m confused. I remembered we’re meeting on December 4, but I didn’t remember anything about November 20.


Roger that, I didn't get around to working on this today, I'll hopefully break ground this weekend and get rolling next week.

I do have an app for subscriptions but the way it works is I can't set separate plans for variations of a single product.
Ex. Arugula is the main product
2oz - $5
4oz - $10
8 oz - $20
For the 4oz I want a $.50 discount plan
For the 8oz I want a $2 discount plan
For the $5 I want no discount plan


Departure time is 4:25pm on Friday, Arrival 6am on Saturday.

@all what was your guys departure and landing times


Hey man at 7pm tonight I have to go to this work Thanksgiving thing. I might be leaving by 8pm but if not I will let you know.

Hell yes. I'm doin the same bruh. Go for a nice long walk. Let no one strut 10 ft in the streets of Boston without the greetings of the National Spirit!


He's blacklisted on account of being the BUZZFEED LEAKER

This Gabriel is in San Jose. Says he was gone 6 months overseas for contract work. Said he was in charge of sparring sessions. Mentioned you, Bradley and Henry often.


Keeps trying to get in. He doesn't know that we know Just knows he's been blackballed. Keep him in the dark per T.


With a 6AM arrival you boys are going to have to get your rental as fast as you can and beeline straight for the campsite address.


He's a bona fide glow nigger. Even though he was great at teaching us hand combat skills.


Hey Paul, it looks like one of the Gabriel's re-applied. I'm going to check with work to see when my next available day off is, and I'd like you to come with for his vetting. If it's the glow nigger then we just bounce rather than risk confrontation. I dont want to have a bunch of guys come just in case it's the glow nigger.


Confirmed with Jason that one is glowie Gabe. He's blacklisted.


Do not communicate with him per standing orders from T


Glad to hear Phillip, keep up the good work. No need to send a photo of the permit, I know you wouldn't lie to me.

Hello Lawrence, hope you’re doing well. I had to work all day today, so I didn’t have time to take the test today. We had such an unexpected overwhelming amount of customers today unlike ever before that I wasn’t able to leave until 4:15, and the DMVs close at 5 PM. But I already finished going over the cheat guide yesterday, so I’m finally ready to take the test. Since I’m off this Friday, I’m going straight to the DMV to take the computer test. I’ll send you a picture of the permit once they give it to me. Have a Happy Thanksgiving 🦃🍁🍽!


any time between 8 am - 10 am or 9 pm - 11 pm


Excellent work as always! The Thanksgiving meet-up was changed to a drilling/banner drop/stencil meetup instead. We'll do that on Sunday.

Ok so Action report for this week is I had a goal of 4 places to promat and I met that goal.  I stickered in Woonsocket, RI , Providence, RI , Tiverton, RI and Lincoln, RI. My goal for this upcoming week will be 4 as well. I also ran a mile yesterday. I finished both books, A New Nobility of Blood and Soil by Walther Darré and Popular Government by Henry Sumner Maine. I am waiting for 2 new books to come in that I plan on starting as soon as they do. I didn't attend last weekends meet up unfortunately but I plan to attend our Thanksgiving one this weekend! I will also be repairing the blower in my car tonight as well. Me and my wife wrote a letter to Chris Cantwell in prison to encourage him at the trial. I also spoke with him in the phone a few days ago and he is doing well. The trial was unfortunate not the ideal outcome for our guys. But that's ok they can't stop what we have started anyway. I will make it to the meeting tonight but I will bit be talking because I litteraly have no voice right now.


[ ](https://pf3618.bloodandsoil.org/group/interviewers?msg=iGHDfCNfzsd9wzkWH) PaulCA says he's a fed and buzzfeed leaker

I know we all get busy and I'm not trying to call anyone out in particular, I just hope you understand my point. When we over look stuff like this or put it on our "to do list later", good people that could greatly benefit this org are forgotten.


I can give you this guy's record, then you can DM him on the vetting server to find out for sure


[ ](https://pf3618.bloodandsoil.org/group/interviewers?msg=eQtnDeZP4sigFAKFi) You were not the first


I Dm'd Paul last night right after the interview. The guys we were given were Bradley, Henry, Paul, Scott, Paul is the only guy still around.


Won't be on tonight, at work for a one off night shift

I Dm'd Paul last night right after the interview. The guys we were given were Bradley, Charles, Henry, Paul, Scott. Paul is the only guy still around.


you're talking about the 3rd? I'm going to be available the whole day. If it doesn't hurt your pocket too bad i'd say take the day but I can pick you up when you need. if we're there by 7pm that should still be enough time to set up camp and unload/set up whatever we need to.


@thomas I’ll take care of that. Will have 3 teams of 2 with 1 hour shifts so they don’t get too bored or fall asleep

@thomas I can drive the drivers through the route no problem. I also DM'd @PF-246557 this morning waiting on response.


Paul also says that per Tom's reuest this guy should be kept in the dark,

Won't be on tonight, at work for a one-off night shift


Hey brother, what time will you be arriving at camp?


It depends on where it's at but I'll probably take off that day so early in the day.


There was a Gabriel CA who was a CONFIRMED leaker and he has made several attempts to rejoin.

Paul also says that per Tom's request this guy should be kept in the dark,


If this is him, he is obviously barred from any comms whatsoever.


I'll be on Tn and I'll be able to take notes.


Sadly it takes a million years for Paul to reply. I am waiting on a Dm from him so we can get closer to clearing this up.


@PF-880297 Will the coordinates for the pickup/dropsite have the trucks facing the correct way down the street? Will we need to write additional directions to fix this?


Editing the eagle square. I got all the cubes made over the stencil, but when I go into Boolean the stencil disappears again

Nice. I’ll check it out when I get home from work


He seems to be certain because I told him how this guy claimed to be the sparring coordinator which which seemed to have made him certain it's him.

I can give you this guy's record, then you can DM him on the vetting server to find out for sure


Don't know how to get those round edges on the corners either


He seems to be certain because I told him how this guy claimed to be the sparring coordinator which seemed to have made him certain it's him.


He seems to be certain because I told him how this guy claimed to be the sparring coordinator which seemed to have made him certain it's him.<br>We'll see


Which means he's certain it's the verified leaker.


Cut it off. End of story. Go no further.


Give me his interviewee number so I can delete him.


With a 6AM arrival you boys are going to have to get your rental as fast as you can and beeline straight to the campsite address.


@PF-1919 Make sure EVERYONE knows that this guy is/was/will be an infiltrator. His many attempts to apply and contact were obviously ignored and deleted so he just got craftier with applications.

Now why did Paul vouch for him KNOWING he was the one who attempted to leak all of our internal comms to people working for the FBI?


So they may be mandating the vaccine in my workplace soon so I may be looking for a new job again. Bright side is if i can find a job and dont have to move I dont think it will be an issue getting the time off

Im not suppose to take time off. Technically they cant approve it so Ill have to go to my boss directly to ask


make sure your cubes are overlapping the stencil. Yours are too high on the Z axis. It's ok if your cubes have sharp corners. The "intersect" operation on the boolean modifier will only include areas where both meshes overlap so the curved corners will be preserved.


Yeah, seems like he thought it was the Sacramento guy then he remembered the San Jose guy


I told him the details and he conlcuded it's he fed


@all :point_up_2: Everyone review this record and commit it to your memory so that you can spot this infiltrator in the future: https://membership.patriotfront.us/group/records?msg=itid2o7pgzyq89BD6

I told him the details and he concluded it's the fed


how is it supposed to look after intersecting? I put the cubes on the same z axis as the stencil


Did you want to meet up saturday in orgeon city to interview the applicant?


That link will expire. I can upload the .txt file here so it can get pinned.


9226 Bayshore Dr NW
Silverdale, WA 98383
United States

Ex. Stencil A photo 1, stencil A photo 2, Stencil B Video 1, so on


Say you need the weekend off to go get the vaccine.


Yes, we will be consolidating ourselves into fewer vehicles on the 3rd

[ ](https://pf3618.bloodandsoil.org/group/nw16?msg=LW3CH2DBXqA5G4d4Q) I assume we are linking up with them on the 4th? Or do you mean the third?


After this evening we will have a clearer picture of what travel fees will look like


I just need patches I ordered them with my stickers but they haven't come in yet


oh wait, I think it worked. The rest of the stencil is gone, but the base is cut to the shape of the cube


Yes! That's what you need. Now there's the last step that I never got to last night


I'm actually going to add a section to the spreadsheet with basic information about blacklisted individuals, should've done this a long time ago tbh


select that stencil piece in object mode. Go to the "3D Print" tab on the right. In the "Export" section, click the "Export" button.


Find where that saved to (it may say so at the bottom of the screen). Open that folder and rename that STL to something like "Eagle-1.stl".


Then, change the modifier to point to your top-left cube instead of the top right cube. Repeat the STL export process, but this time, rename it to "Eagle-2.stl". Do this for each section


Send me a mega link once you're sure the stencil was properly split and will print fine. I'll add them to my mega folder.


Ok. I don't know if it's the *best* way to split it. I probably won't have time to print it tonight, but I can upload it to mega if you want to check it out


Oh boy it's this guy again.<br>https://twitter.com/Georgia_AFA/status/1463501183390261256?s=20


They will be facing the correct way for sure

@PF-880297 Will the coordinates for the pickup/dropsite have the trucks facing the correct way down the street? Will we need to write additional directions to fix this?


@all Make sure you get good pictures of the police if they show up in all their kit. I want nice portraits and group shots for any graphics I may make.


Already QT'd another one of his posts here: https://twitter.com/FascTheStampede/status/1463648579789078529?s=20


Reminder that he's a former who got kicked because he wouldn't do anything but sticker.


He probably listened to that deranged NWG rant after our IDay action and lapped it up like the puppy he is.


The only concerns I would be that the stencil has to be weldable, and you want to avoid loose pieces. Also, you want to make sure a slicer will properly interpret it, which it should it you made it that far.


@PF-8472 Let him know PF never asks for that kind of info.<br>https://twitter.com/ILikeRacism/status/1463649798657953795


The problems in the slicer are often noticed after previewing the slice, but these files should be fine. Good work!


For the first, ask him to show you links to the dozens supposedly identified publicly. Where can this information be found? If it can't be found anywhere, it's not a dox.

Second comment more or less the same thing. He's overestimating police because he wants to be afraid.


Also, cowing your message for the sake of being perceived as better by cops is dumb.


Yeah I have 3 pads so you should be good. You me and Kyle probably

Zach, I’d actually prefer to sleep in the van but, I did grab a sleeping bag-you said you had padding?


Thanks for your help bro. Have to start learning how to design them next


No problem. That's a bit more involved, but it mostly comes down to basic manipulation of vertices. You almost already have all the knowledge to start that.


Fuentes gets flak for saying awful stuff about the kids who died in Waukesha and his fans rush to his defense by… attacking us on twitter????


We have made 0 official mentions of Fuentes ever but they never shut up about us


@PF-646085 yes. That way if any of us are ever out of stickers, we can always stencil

Alabama-activism

I ordered mine some time ago. I guess I'm just curious as to what the kit involves. We just get stencils, so are you wanting us to get our own carry bag and paint to go along with them? Just making sure I'm understanding what is expected of the kit.


Did he actually say anything about it or was it just one of his fans?


There is a video on Eric Striker's telegram of Fuentes mocking people for being upset about the kids & talking about how they would've had black boyfriends in the future


They will be facing the correct way for sure


@PF-8943 Does that sound good enough to kickstart the research?

securityevaluation

There was the J6 prisoner support rally, and some recent rallies as the BLM Plaza has been completed.


"We spent about 30 hours cutting 32'' coroplast stencils for each letter of our saying, then an insane amount of math for spacing."

[ ](https://pf3618.bloodandsoil.org/direct/YyWYekBin9cbNHPuk?msg=4FrhGfiCgKzAJyFub) I'll be there :thumbsup:


Sounds like they did a TON of work to make it happen, but I know us NC boys can put in just as much so we make an amazing impression


Guess we made a good impression on him in Pittsburgh


Reminder about the meeting tonight at 8 PM EST btw @all


Sounds good! I will be on mumble at 8 PM EST tomorrow (wednesday)! I appreciate all the work youre going into to help us achieve this, wouldnt be possible without your help!


The Indiana afa guy will be coming, and he wants to bring sweet potato casserole.


RSVP 100% even though I don't remember the date


Marcus said he could make it at least so that's good. I get it though, life happens


Not your fault given that this thing at all is a reschedule from Carter not hopping on the other day


i may hop on at 9 its the day before turkey day ive ggot a party at my house no way i can get on


Nah no worries bro, honestly I'm not gonna be able to be super active myself until after the weekend. Tonight is the last night I have time before thanksgiving through Sunday lol


I'll make sure Marcus and I listen up well because two heads is always better than one!


Update on VE situation. All VE we scouted are bad. I found a good one, secluded low pop park.

Only problem is, it is 25-30min away. I think we might to persevere a long ride for the sake of safety.

Check it out:
10601 Riverview Rd, Fort Washington, Maryland


Stickered Bridgewater Center, Bridgewater, MA (1/1)


Let’s expect 15 to be taken worst case scenario. Do you think 40 spaces will be enough for us?


No problem. That's a bit more involved, but it mostly comes down to basic manipulation of vertices. You almost already have all the knowledge to start that.


Alt + Z or there's a button in the top right of the screen


`There's no way to confirm that anything was actually taken since nothing appears to have happened. I know you want to fearmonger because you think it drives people toward more moderate opinions, but you could do better leaving PF out of your discussions.`


Ya I know lol that's what I meant but thank you

Excellent work as always! The Thanksgiving meet-up was changed to a drilling/banner drop/stencil meetup instead. We'll do that on Sunday.


Doing the united we stand2 now. I noticed that the bottom of the top arrow doesn't line up with the point of the star. Doesn't really matter I suppose, but looks off center in 3d model


I think i remember some minor weirdness like that with that one. It's subtle enough that it shouldn't' matter


Josh seems to think that it’s the good one

Do not communicate with him per standing orders from T


`Activism is about so much more than just sloganry. Not every single word of PF's message is about race, and it's unfortunate you got kicked out. Best to leave PF out of your rhetoric if you're going to be negative and repetitive.`


`December Action Attendance`

I am reaching out to confirm your attendance and readiness for our December action. Everyone has had ample awareness of this event, so we expect a very large turnout.

Please respond to this message to confirm.


Alright, can you give me some more details?


Ok, that's still an odd symptom, but yeah, it looks like you got it


`PF isn't meant for just anyone. There are requirements and standards which demand people above the average, who change the way they think and act. It's very unfortunate that you were unable to understand PF's actions. You should leave those actions alone if you're so opposed.`


Is this about my grammar question or did something important happen?


3) 5055 Allentown Rd, Camp Springs, MD 20746


RSVP 100% even though I don't remember the date


[ ](https://pf3618.bloodandsoil.org/group/vincent_wedding_party?msg=bBDtxQeKcPL26bMX3) Wish our membership had this same reaction about demos


30 minutes in a box truck is something we may want to avoid.


We can't plan on an Exchange until we've been there in person.


Today is the first time in 4 months that I actually got two full days off in a row. I'm never home. I work constantly. I cannot do activism. I can't do anything for the org. All I do is work all the time.

Since I may be in a transitional period for the next month or two with regards to my job, I can't make time to be across the country. Originally I told Thomas I could be the lead driver but there just isn't enough time or energy in the day. He can contact me if he wants to talk further.


I usually carry a microfiber cloth with me. You can also sticker the backside. Don’t sweat it. Unless it’s out of focus, too dark, etc I post pictures even if I’m unhappy with them. Let the photo editors decide what’s post worthy, not our job. You did great.


Yes of course, It is really hard to find someth8ing secure 15 min radius. It will almost certaintly have us exposed in a parking lot with a number of ppl. 200 guys assembling would attract a lot of attention immediately. Cops would be called within 15 minutes


hmm it's saying my z dimension is 0mm in cura


And you're sure the stencil and the cube you made are occupying the same space? it could be that the stencil has invalid geometry like the America First one.


[ ](https://pf3618.bloodandsoil.org/group/nw9?msg=AkLtRjL6g3HDQDEu2) "Iron sharpens iron.

Are we doing enough? At the end of the day have we fully exerted our strengths towards achieving our purpose or are we lying to ourselves?


I cant exactly do that because they administer the shot on location. Ill see if I can find out which one it is and say i want the other one so the idea might work

Say you need the weekend off to go get the vaccine.


Copy that. I'll have a loaded car with a table and all our trophies.

Gear Commitments:
NW9-
ND - Samuel VA 1 folding table
Ben MD 2-60qt pots, 1 folding table, 1 propane burner
Roger VA 1 folding table


The cube doesn't have to be the same height as the stencil. The important thing is that 100% of the stencil's height is inside the cube


Because that intersect "boolean" modifier will only keep the parts where the two meshes overlap


Yeah, so you just need to move teh cube to make it overlap. select it in object mode. G to move. Z to restrict movement to that axis. then move it down. Or change the z axis value for the location on the cube to match that of the stencil


you may need to right click on each object when selected in object mode and click "set origin" "origin to geometry"


Leave it there. He wants a debate but he's just resentful that he got kicked out.


Do you think you want to take a break from the org and apply when your life is in a better spot?


"Why isn't your entire message about race?" - Because our ideology includes the whole spectrum of societal life and structure. We believe that there is more to a functioning civilization than "oh boy I'm so white today".

"PF's rehashed like everything else" - Not true, obviously we're the difference. Racialism "white/anti-white" composing 90% of the message is actually what has been the norm since the 80's at least.


if I raise the z axis of the cube, it appears to mesh perfectly


but if I set it on the same z axis as the stencil, it gets all buggered


Just do whatever it takes to make it to the event. If you're going to get sacked anyways because you don't want to let them inject you with Fauci juice, then take the weekend off.


I got it to work. Then again, we have different versions of blend so yours might be pickier


Show me a screenshot of your cube on and the stencil both showing


You can try changing the solver to "fast" on the boolean modifier. The two meshes are lined up on the Z axis, right?


My apologies, I didn't mean to come off so harshly or hostile or anything. That might be best, but let me hold off on a withdrawal until the holidays are over. This is one of the busiest times of the year for my family, as many others I'm sure. My situation is very complicated and I spend way more time trying to make room for non-work activities than I'm comfortable with.

I wouldn't make a good activist, but it's solely due to time constraints in my schedule. Just ask John WA, he knows me better than almost anyone in this org.


With the stencil selected, in object mode try clicking this button.


I don't think that will do anything, but that's the button that fixes some bad geometry. It will say at the bottom of the screen if it did anything


Then it's possible that maybe your cube is messed up. Maybe you turned it inside out when you were moving the edges around.


Yeah I have 3 pads so you should be good. You me and Kyle probably


Remember that identity is about culture and EXTENDS from your genetics, but your genetics are NOT culture. Racialism in this type of online ecosystem has stock photos as its greatest expressions of cultural relevance, because everything else that's been produced by civilizations has been "tainted" by things like religion, warfare, government, economy, and all the other things that make society what it is. You can't construct a prim and perfect stock photo society.


for some reason, it's changing the z dimension to zero


I changed it to 2 after doing boolean and voila


Stickered Bridgewater Center, Bridgewater, MA (1/1)


it's strange. I have to have the cube 2mm above the stencil


wonder what's causing it to 0 the z dimension after boolean


@all Also, meeting in 10 minutes on Mumble. Try to get mumble permissions if you need those, Joe.


Hey I know you have room for one more. If no one person decides to take up that spot, is it possible that I can bring Nathan MI with me and ride with you, and then he can ride with a guy from Michigan on the way back? He is living with me currently so it makes it easier, but its alright if not since we have other options.


Also notable.

We use the term European to denote our racial collective, not white, because it is a term which conveys a greater geographic and cultural lineage than a term which is a literal skin-level observation. White is fine as an informal classification, but in formal matters of diction, we are American, of the European race.


This is to educate you guys. We have all the answers for this Twitter sperg's questions, but they're lost on him. @all


The Indiana afa guy will be coming, and he wants to bring sweet potato casserole.


When you see the location of something, You're actually seeing the coordinates of the orange dot when you have that object selected in object mode. That orange dot is not always where you'd expect it to be. You can move it by: when selected in object mode and click "set origin" "origin to geometry"


Welcome back @PF-366990 better be on your best behavior this time


[ ](https://pf3618.bloodandsoil.org/group/vincent_wedding_party?msg=bBDtxQeKcPL26bMX3) Wish our membership had this same reaction about demos


Mike's role can either make or break the whole action so it's important we hear from him.


It's missing a bunch of pieces which means somewhere the geometry is messed up even if it looks good in blender.


Action report this week is stickering Framingham, York ME, and Spencer. Went camping with Josh, Henry and Tyler, dropped a banner, posted some stencils. Next week's action report is gonna be 1/1 for me


I didn't get hostility at all, no worries. Get things right in your personal life and then come back to us. We will be here.

My apologies, I didn't mean to come off so harshly or hostile or anything. That might be best, but let me hold off on a withdrawal until the holidays are over. This is one of the busiest times of the year for my family, as many others I'm sure. My situation is very complicated and I spend way more time trying to make room for non-work activities than I'm comfortable with.

I wouldn't make a good activist, but it's solely due to time constraints in my schedule. Just ask John WA, he knows me better than almost anyone in this org.


I am meeting kule at shaw park in clayton mo if you’re interested

In the evening sometime. I'll figure it out tomorrow.


I'll talk to Thomas and see about you having removed. If you can, meet up with one of the guys in your area and give them your uniform and and materials you have.


interviewers

I'm actually going to add a section to the spreadsheet with basic information about blacklisted individuals, should've done this a long time ago tbh


Hey man at 7pm tonight I have to go to this work Thanksgiving thing. I might be leaving by 8pm but if not I will let you know.


I told Henry that I am at a work party at the moment. Should I just not make the meeting?


Whatever you can think of just let me know. I'd rather not show up empty handed

When I look at the list at home ill message you on threema about it


I'm talking with vernon about something right now, I dont believe Eric will make it so im trying to figure stuff out


We do need folding chairs and a table. If you have those that would be greatly appreciated, if not that's ok


If you join the meeting you should be in a situation where you can talk to at least give your action report, and you should be able to listen to the whole meeting. If your work prevents you from doing that, and there's no way you can step out for a minute, then you'll be unable to attend the meetings. I wouldn't be too worried about people listening in on you, though. You should be able to talk generally enough that no one will know. Of course this depends on your job.


I'm gonna be talking to Phil about it we'll figure out a time. We discussed it in the meeting and it'll probably be late at night.


@all For those not present in today's meeting, please DM me your commitment for next week and let me know if you achieved your commitment for the previous week.


In the future, for something like a work party, you should be able to step out for a few minutes to give your action report. Regardless, please DM me the info I need tonight.

My Threema ID: https://threema.id/CAJ5RXAE


The stencil itself does have some issues, so that could be the problem.


I agree; I asked him if his placement on the east coast is certainly Nov. 26th. No answer yet.

Mike's role can either make or break the whole action so it's important we hear from him.


Overhang faces aren't a problem so that can be ignored.


There's work-arounds, and then there's the real fix of just fixing the stencil.


I didn't realize my stencils had so many issues lol


well it seems to only be an issue on my end


yeah, actually. since i can make a chunk of the stencil slice fine.


nah, that was with my stl that I made just now


so I moved the z axis location up to 8mm


you can always make your cubes super huge on the z axis. the excess doesn't matter.


Nice. I think the skirt is a waste of time, though


[ ](https://pf3618.bloodandsoil.org/group/vincent_wedding_party?msg=98LK8t9Aoocpi2fxM) Idk what the situation in Texas is but all my guys are going to the demo except one 😎


Is the stencil's height 100% inside the cube? I just tested what happens if your cube doesn't entirely encase the stencil on the z axis, and it produces weird results


Hey Jason, just wanted to let you know that unfortunately I will not be able to attend on the 4th. I look forward to being involved with our next demonstration and any other activities in the future.

No worries, I didn't expect that you would be able to without the advanced notice that others received.


Inspiring man. You guys did amazing work


Gotcha, like I said we didn't expect you to be able to come without advanced notice. Hope to see you at the next one.


Roger. Anything else other than a bag and spray paint? Don't we also need the paste for posters?

Alabama-activism

@PF-646085 yes. That way if any of us are ever out of stickers, we can always stencil


mine seems alright. you can try sending a screenshot with the section 2 cube showing and the boolean modifier off


Copy that. I'll have a loaded car with a table and all our trophies.


Yeah, i mean you just need to make sure they're overlapping. move the screen around to ensure that.


I will be, typically 3 months heads up is provided correct?


@thomas I'll be landing in New Jersey tomorrow, and then I'll be gathering the supplies throughout the next week, and then showing up with everything that I've gotten on Friday night/ early Saturday

I agree; I asked him if his placement on the east coast is certainly Nov. 26th. No answer yet.


@PF-646085 yes and yes. I’ll post some stuff


Move the outside edges way out like this.


Can you make it Friday, between 12 noon and 12 midnight?


Did are you using the rounded numbers for the x an y positions instead of getting the exact value?


More then likely, yes, the drive isn't too far/ long


the advantage is that you can see how big that piece of the stencil will be by looking at the size of that cube. also, it looks neater lol. Once you get good at it, it only takes a few seconds to make them the exact size


There's a shit ton of settings in there that allow you to modify your prints. If there's ever something special  you're trying to do, chances are, cura has an option for that


Could you authenticate me on mobile real quick? I’m in the lobby


Yeah theyre probably trying to use ethnic intimidation to get them to close their shop in dearborn


oh nice. you already made the squares in the blend file for reject poison


Excellent. Every one of those sliced properly in my slicer. I added those to my mega folder and my local folder of stencils. I think I know what happened. This stencil has rounded corners so when you were getting the x/y values of the edges, you needed to select a vertex that's at the left-most side of the stencil (for example)


A little bigger than a piece of printing paper


So to get the left edge, you needed the x value of this vertex which is exactly -150.


Liquid nails caulking and three layers of white tape on each seam. also back

Plan for 14 by 46-48 feet billboard

8 drop cloths most likely but can/will adjust as needed

a foot of overlap putting it together

M8 or M13 tape

use sheets of cardboard to walk on the banner without it getting dirty

PICS
SQUARES ARE GROMETS
TRIANGLES ARE

dump out half the water bottle, twist around middle so you can tie rope

spraypaint water bottles black to blend easier

telescoping ladder make everything black no reflective shit

No worries! Nothing we really could have done about that, I'm just glad that now BOTH sides of the carolinas will be able to create their own things. That was always the end goal 🤠


Will not be available Monday, Tuesday, and potentially Wednesday


Selecting this edge will also give you the correct X value.


Marcus will make his notes look pretty and then we should be on the same page


Another meeting Friday night at 9 PM EST


but w/e. now you know that the sizing on the outside doesn't have to be exact


[ ](https://pf3618.bloodandsoil.org/group/vincent_wedding_party?msg=98LK8t9Aoocpi2fxM) Idk what the situation in Texas is but all my guys are going to the demo except one 😎


Its located on the property of Appalachian Tool & Machine Inc


I've got like...half a tote (8-12 gallons) of raw material to process


Haven't gone through those, kinda busy at the moment, but it seems ok from what I skimed through.


Welcome back Nathan, hope to get the chance to meet you sometime soon 💪🏻


I attempted my former routine today and failed pitifully. Lack of competition on the road for nearly 2 years has made my body soft, and good lighting at the mirror has had me under an illusion. I will surpass my former physical achievements in the next couple of months with hard consistent work + my occult knowledge, I've already started.


By the way, do you have any posters/stencil we could use ourselves?

Let me know if you're still down for re-re-decorating smoky hill, I'll see if Jesse or anyone else is


Dunno if we're still getting out tonight though, it's pretty late.


It's a workday, I assumed most dudes would be dead tired anyhow


[ ](https://pf3618.bloodandsoil.org/direct/3Q7R233eHLqabRKPKobP3kpEYF2mTpkyAo?msg=WSoaefzZ6Q7tpDpez) I'm still surprised by the dark being so early


I'm unfortunately not free this weekend. John tells me he's free Sunday and part of saturday

Lets meet Saturday in Chandler at 6pm does that work for everyone? @all


Are you going to make it on the road trip next weekend? And the event in early December?

I should be available this sunday, but I have a thing with my school most of saturday


@PF-2848 mondays at 9pm we have mumble meetings. are you able to attend?


@all who's available? looks like 3 guys in line.


Yes. I have two confirmed, landing at 5:00pm Friday Dec 3rd. If you could fit two more in a vehicle, it would save us a rental.

@PF-9412 remind me you are flying into Philly?


Departing flight takes off at 7:00am Sunday Dec 5th, so we'd have to be back at the airport around 5:30am or earlier.


@PF-983004 Will you be making everything or can we bring food as well?


Nice, I hear power transformers love the stuff

I've got like...half a tote (8-12 gallons) of raw material to process


@all In case you haven't heard - The drilling with SamVA got moved to next weekend due to a string of illnesses. We can get the renewed attendance at our next meet  :ok_hand: :thumbsup:


Do you ever do like really small towns? I ask this because on our route tomorrow there are quite a few.


They seem to all have at least a small downtown with potentially good pics


Yes, I often sticker in extremely small towns. Probably the majority of all sticker posts I've made have actually been in smaller communities because there are simply so many. You can always find at least 4-6 spots for a good sticker and picture.


https://t.me/PatriotFrontPromat/4387<br>I stickered Hell, Michigan which is literally the middle of no where. There wasn't even a downtown lol.


They made the schedule last week. It's very unlikely I can get it off

If you can't get that Saturday off then it'll be rough. This is the last chance to drill before the event.


Im hoping to know my situations direction November 30th


Hey Brother I'm having bank card issues 😒     but I can't order the stuff I need and have it here on time I don't think. I plan on checking the sports outlets in town but not sure.


It's just natural flavors. I didn't think anything was wrong with it.


It doesn't have any of those artificial sweetners in it


Sorry, away for the weekend and getting internet through a potato and a piece of fishing wire.


[ ](https://pf3618.bloodandsoil.org/direct/PF-201612?msg=WgfY6Pa5cApAbzbLh)  Ok i remember you now haha


Turkey Mountain Tulsa Hike/Chandler Park Tulsa Stencils


[ ](https://pf3618.bloodandsoil.org/group/oversight?msg=zg9dNshbKL7LwDBMr)  Lol


So if there's no downtown what do you photograph?


You can always find somewhere to place a sticker. Worst case scenario if its not a busy area, which it probably isn't if its rural, you can stop and put stickers on the back of signs along the road itself or at an intersection. Ideally though, try to go to towns that have some little downtown of sorts.


Also the Q&A should be for 8pm on Nov 24 (Wednesday). Unless these two gentlemen you mentioned are unable to make that date and time, in which case I'd reschedule, but for now that is what I told the other directors


Can be free Tuesday and Wednesday after like 4-5 ish

What days are you free next week for some local-ish activism?


Wonderful. I have told my girlfriend that I will be going camping for a couple days with friends those weekends. All she asks is that I text her before going to bed

You can expect the drive to be between 10 and 15 hours. We will make sure the vehicles are spacious and yes we will make stops


If you pack light it shouldn’t be a problem I’ll see what I can do

Departing flight takes off at 7:00am Sunday Dec 5th, so we'd have to be back at the airport around 5:30am or earlier.


[ ](https://pf3618.bloodandsoil.org/group/pnw_planning?msg=9Cf5G6ikQGSXgv82v) Everything is covered, but you're welcome to bring whatever you'd like


Notes from the medic meeting
Attendence 11/12/2021 - PF Medic Meeting
Mark MO - most of it
Adam PA - yes most of it
Steven TX - y
Samuel NJ - everything but white vest
Jesse CO - need to order kit
Adam IN - Don't have any. Can get some stuff

Ask thomas about evac car.
Food allergies and medical conditions. Ask for every network
Samuel NJ has asthma

Postions in formation?
Make sure fingers are clear in box truck.
Medical condition card, place in a uniform place?
Water in boxtrucks, include in event fee?
Camelback and water bottles
White vest

-Training Priorities
1) Wilderness - cheap and througough, applicable
2) BLS training
3) Wilderness First Responder
4) Red Cross First Aid

Samuel NJ - has boyscout first aid books
Jesse CO - Has Wilderness First Responder Books

At some point make our own curriculum


A man on my shield men @PF-715262 is having credit card issues and cannot order his pads or chin straps on time. He said he'd check out his local sporting stores but being that Arkansas isn't known for its street hockey, I don't have high hopes that he'll find the leg protection necessary for the demo. Is there any way we can help him out?

All team leaders are responsible for readiness of their men. For Vanguard and Rear Guard teams this means pads and chin strap are needed. I suggest doing what @PF-3354 did already and have a meeting with your team as soon as it is finalized to go over everything pertinent.


[ ](https://pf3618.bloodandsoil.org/group/pnw_planning?msg=ipMwehsNXBvrKgYi9) Water is lame. Only hydrofags guzzle gallons of water. It needs to be at least enhanced with electrolytes. Jesus hated it so much he turned it into wine.


So what's the issue specifically? Can you have the leg pads in by the 20th?

Hey Brother I'm having bank card issues 😒     but I can't order the stuff I need and have it here on time I don't think. I plan on checking the sports outlets in town but not sure.


Don't worry about the chin strap. I've got an extra you can use.


Hey I'm over in cabin 152, with Sean AL, feel free to drop by for a greeting, and if you'd like a glass of scotch as well 🤝🏻

If time gets cramped we can also reschedule


We lost it and are waiting on a replacement to come in.    If I can find a pair in town I'll have them but I don't know.


Is there a chance you'll have them by the 4th? Or is there no telling at all?


Anyone tryna squad up to throw some promat up this weekend?

[ ](https://pf3618.bloodandsoil.org/group/nw5?msg=cdd66225-5f91-4712-9854-f32993f3fee4) @PF-6974  You too my guy!


The only important thing is that you have the pads in your hands and that you sand/paint the hard parts of them before the demo


Do you see that as a possibility before we leave for the demo? Because if not then I'm gonna have to pull some strings to get you some hand me down pads from leadership...


Thanks for the tip. We'll have to give it a visit.


Hey man. Got held up. You still available?


I need a secure place to park my van that nobody knows about 🤫


I think there should be time.  Really only need like 24hrs to dry so I would think so.


Welcome back @PF-2848 I'm looking forward to seeing you again!


Good deal. Keep me updated on it. Go ahead and grab some Rustoleum brand "antique white" spray paint just in case and have it ready for when the pads arrive.


Sorry Vin. False alarm. I talked it out with him and I believe he'll have time to do what he needs to by the demo date.

I appreciate that bud. I have received a great outpouring of support in the past few months. I couldn’t ask for more.


Are you sure? I can set it up if need be.


Hello Bill, you're on my team in the Rearguard for the upcoming Dec event. Just wanted to introduce myself, and make sure you know to purchase the leg guards and chin strap. Also, there are painting instructions for the leg guards. Let me know if you need any of these items, I'll send you links and information.


Oh sh*t for some reason I thought they were going to be tan... I'm glad you said something!


Hello Victor, you're on my team in the Rearguard for the upcoming Dec event. Just wanted to introduce myself, and make sure you know to purchase the leg guards and chin strap. Also, there are painting instructions for the leg guards. Let me know if you need any of these items, I'll send you links and information.


I've also sent @PF-6309 this info, he is on our team as well.


I've also sent @PF-645161 this info, he is on our team.


Let me know if you have any questions regarding doing murals. I’d like to believe we NW8 guys have it down.


Man I've got like 3 cans of krylon industrial in White I've been holding for stencils but the color probably wouldn't match.


Hey Loy, making sure you know to purchase the leg guards and chin strap as a heavy shield bearer. We are on the Rearguard. Also, there are painting instructions for the leg guards. Let me know if you need any of these items, I'll send you links and information. Otherwise, if you make it on the 20th we can discuss it.

Yes feast and drilling Saturday, but us in NW2 (South/Central Texas) are driving up Friday night to camp out at the drilling grounds.


It wouldn't be bad to have a pair ready and set to go just in case. But essentially he's hoping to have his replacement pads in within two weeks. I told him to go ahead and buy the required spray paint ahead of time so he can paint them the moment he gets them in. Beyond that he just needs 24 hours for the paint to dry so by the time we leave for the demo he should be good.


Rules 1 and 2. Don’t get caught in the act. Don’t ever let your vehicle be filmed or photographed, and especially not the plate. Plate flippers or taping the plate is sufficient, as long as the car is very common, and completely stock. Park far away from any mural you do at least a block or more away. So far this has been the extent of most of the ones we do and it seems to work.


The pads do have to be tan. Antique white is just another shade of tan.


For supplies get many cans of Rustoleum 4x Turbo white cans. They’re tall. They’re better than a painters professional paint gun tbh. Then use Montana paint cans. Preferred colors dark indigo blue, and Fire Rose red. Go to Montana’s spray paints website to find a store near you. And no “Michael’s” doesn’t have shit. You’ll want to find a professional arts and crafts store, or an outright graffiti store.


Ok, just make sure he gets the right pads. We need to all be matching.


Just a last checkup, I dont anticipate any surprised but you understand why I wanna double check

What's your assessment of our readiness for the December event? We have the laptop prepped for getting the radios ready. We're making sure every network actually brings all their radio equipment. You're a smart guy and have CTCSS covered.

Am I missing anything? We should be completely good to go as far as things go and those few reminders. You're *the* guy to talk to here and so I wanted to get your temperature reading. Wanted to ask now so we have time to scramble a few things real quick with the time we have left in case I'm completely dropping the ball on something here

CTCSS? Oh okay, was just making sure we knew and had that ability already mastered, hell yeah


Ok it says light tan paint antique white works the best?


@all who is staying the night for Thanksgiving?

[ ](https://pf3618.bloodandsoil.org/group/pnw_planning?msg=ipMwehsNXBvrKgYi9) Water is lame. Only hydrofags guzzle gallons of water. It needs to be at least enhanced with electrolytes. Jesus hated it so much he turned it into wine.


That's really what the concern was. Arkansas doesn't have any place to buy any hockey pads. Much less the ones we need. So if he couldn't get his pads ordered in on time then we'd have a problem. But I believe we got it worked out. If we have any other problems I'll let you know.


Dude it literally takes forever for anything to load for me on here. I absolutely hate it


Ok, the link we gave was for ordering online though


I will talk to Thomas about getting some extra pairs.


I most definitely will come to you for advice. We probably won't focus on the mural until after National, but it will be addressed. We have some other objectives to accomplish as well. NW2 has a ways to go before we kick it into high gear, but we are well on our way to moving towards more ambitious goals. Austin has plenty of murals and such, and is relatively risk free due to the police being severely defunded. We're going to get some practice there first, so we can be in and out fast when we pick a high risk area.


Also those 4x turbo cans don’t stay on shelves long. I highly recommend buying them all up if you find them. They’re sold at Home Depot.


Understood. We have a good supply of red and blue, but not white. Although there are plenty of home depot/lowes stores down here, shouldn't be difficult


Yeah practice under an underpass. Time guys even. For the last mural we did I had guys pretend to be inside my truck, get out, and move towards where the wall was. Was really funny. We found an abandoned brewery, giant building, to practice in.


Nice, that's a great idea. We're planning to have plainclothes nondescript lookouts, perhaps with radios, or maybe just using threema, to keep an eye out for any boys in blue.


Don’t use rustoleum red and blue paint for stencils. It doesn’t dry fast, it’s slow, it can’t cover much ground compared to Montana. Doing those actions you want SPEED and efficiency. Rustoleum 4X turbo gloss enamel white tall cans, plus Montana red and blue paint, is the fastest and most efficient way to go about it.


Gotcha. We've been using rustoleum for banners, I'll have to make sure we keep em strictly for that purpose


@PF-2061 claims 1 can of Montana can make two banners. So a slightly more expensive can that does 2x as much. Therefore it’s cheaper. I haven’t tested it, but Montana is king for graffiti. It’s what it’s designed for.


@all Now that stencils are/will be available for us, if you decide to go and stencil do not go alone. Go in groups. Also, do not use the spray paint we have for stencils. Save those for banner making. There is a specific brand we use for stenciling that is faster and dries quicker. Speed is most important when stenciling.

Welcome back @PF-2848 I'm looking forward to seeing you again!


I've also sent @PF-645161 this info, he is on our team.


Yeah I ordered everything already, should be here this week 👍🏻


Great, thanks man. Looking forward to meeting you.


Great, I'll be sure to use all this information. Thank you.


I'm sure I'll have some more questions in the future.


Sorry I missed your reply. Yup, deleting out of SocMed folder is all good. I have all the video in a other folder as well for the Action Reports.


@all due to some of our members falling ill and after discussing with most of you I am postponing our drilling by one week. We will go from 10am-5pm Saturday 11/20. Thank you for cooperating. Please indicate you read and acknowledge by hitting the :PF-Flag: react


Saw a guy stop and pull out his phone after noticing one of the flyers I'd put up in one of the towns I was at today. Can't help but wonder if he went to apply, considering he didn't tear it down.

We won't be doing the ones in Lapwai, there's plenty of others along the highway that we can choose from.


@PF-731400 Given the location, Sunday night might be a better time for stickering so as to maximize the number of people who see it. As for Saturday, I've got a prior commitment in the afternoon/early evening


Can't say exactly when I'll be done with it, not until 7PM at the earliest


Hey man, thanks for making the time to come out. I didn't realize it was such a far drive for you. Next time, make sure to mention it. I don't expect you to drive 2hrs just to sticker. We can pick spots that are towards your direction too


Hey I'm over in cabin 152, with Sean AL, feel free to drop by for a greeting, and if you'd like a glass of scotch as well 🤝🏻


Okay cool man.  We might have to postpone because a storm system coming through but well see

You can always find somewhere to place a sticker. Worst case scenario if its not a busy area, which it probably isn't if its rural, you can stop and put stickers on the back of signs along the road itself or at an intersection. Ideally though, try to go to towns that have some little downtown of sorts.


Its not preferable to sticker in the rain, but I've done it several times, so it can be done if need be.


Well I just meant the snow. But I know what you mean


Oh yeah, I didn't even think about that haha :cloud_snow:


Yea...Tyler brought that to my attention when we were stickering


Link to those stencils: https://mega.nz/folder/gA0mVQ6A#CCmSKPvYJlspQfxn_W-aAg


Hey Tom, you're coming to the 20th drilling right?


You will be gone for the entire 72 hours @PF-770521 . There will be no opportunities to leave the event.

I assume we will be driving to the action this time?


@all

Give me an update. Who do we need to lean on?


https://twitter.com/4WPub/status/1458483351858388995

Old Dominion University might be a good place to sticker in light of this

I believe that he is going to have @PF-787082 contact you about it, but i decided to do it myself instead of allowing them to procrastinate further.


We will be gone for the entire 72 hours @PF-770521 . There will be no opportunities to leave the event.


For me, it's just NW03 Ben CO. I sent him a follow-up message today. He said he has 6 people going + one unaffiliate. I asked him how many people total in his network. Still waiting to hear back.


Meetings happen every thursday evening. I'll put out more reminders next time to help.


I will provided there is space. Consider me last in line for crashing there


I am, provided nothing forces me to do otherwise.


[ ](https://pf3618.bloodandsoil.org/direct/PsnMRhexWJv5PSuGQojJiq744DCu3cTZKh?msg=gXPWnTSfI1jIAEXhd) At ease soldier


@all Now that stencils are/will be available for us, if you decide to go and stencil do not go alone. You should let us know where and when you want to execute. Go in groups, always scout, and have a lookout (depending on the setting). Also, do not use the spray paint we have for stencils. Save those for banner making. There is a specific brand we use for stenciling that is faster and dries quicker. Speed is most important when stenciling.


If you pack light it shouldn’t be a problem I’ll see what I can do


Were you unable to turn heat on your window?


We got the heat on but the fog was inside the camera lens too


2021-11-06 Sparring
https://mega.nz/folder/cZpE0YgZ#HTCaF6c7bcweT-CpGO-gHA

2021-11-06 Olympia WA Banner
https://mega.nz/folder/UJgwGADa#zKhjgWr9em9VCEhv-udzdQ

2021-11-06 Tumwater WA Banner 1
https://mega.nz/folder/5Aok1CRA#3cfIWULxj5fukNIh-IY9-A

2021-11-06 Tumwater WA Banner 2
https://mega.nz/folder/gIokyS4K#WES1Yf-OHK-jg7JYrlLI5A


See if you can find it on the manufacturer's website or see if there are other options for the same model.

The only downside is that it kinda stretches out the hat after its been in it for a while and makes it loose without the bumpcap inside. but I have a small head so maybe its just me.


Im hoping to know my situations direction November 30th


WA October 30th Banners

1⃣ Federal Way Banner

[REDACTED]

2⃣Kent Banner

[REDACTED]

3⃣Renton Banner

[REDACTED]

4⃣Burien Banner

[REDACTED]

5⃣Seattle 1 Aurora Ave Banner

[REDACTED]

6⃣Seattle 2 I-90 Banner

[REDACTED]


Yea...Tyler brought that to my attention when we were stickering


Double check make sure nothing was missed^


Hang on I was just told it’s being moved back


@PF-950806

`Updated Attendance`

Network 14:
- Brandon CA
- Logan CA
- Nathan CA

Northern California:
- Josh CA
- Paul CA
- Christopher CA
- Norman CA

Nevada:
- Bryan NV

Here is the list of individuals I am still working on getting ticket confirmation from.
- Gary CA

Not Attending:
- Carl CA (says he is not attending)


@PF-950806

`Updated Attendance`

Network 14:
- Brandon CA
- Logan CA
- Nathan CA

Northern California:
- Josh CA
- Paul CA
- Christopher CA
- Norman CA

Nevada:
- Bryan NV

Here is the list of individuals I am still working on getting ticket confirmation from.
- Gary CA

Not Attending:
- Carl CA


@all
- LIMIT YOUR PHOTO TOTAL. 4-6 photos per city. Even if multiple people are taking photos, have only the best 4-6 posted by ONE person.

- VIDEOS DO NOT GO HERE. Upload videos to a MEGA.nz folder and link it to @PF-8656 for action reports.

- ONLY PROMAT ACTIVISM. Banners, hikes, etc. get DM'd to @PF-8656 in a folder with video.

- DISCONTINUED PROMAT WILL NOT BE PUBLISHED. If you have generation two promat, you've had almost six months to get rid of it. Any photos containing discontinued materials will be ignored.

- LABEL EVERY POST FULLY IN EACH PHOTO. Get the full name of your college, exact name of the city, and then the state abbreviation. Do not abbreviate city names, college names, or only label the first or last photo. If I need to look up where your promat is myself, I will ignore it.

Start being more specific with how you label your activism posts, if there is a more specific denotation of your activism. This will be used to create a more accurate map of our activities this year, with less guesswork than occurred last year.

Example:
`Chicago Riverwalk, Chicago, IL`
`Pioneer Park, Dallas, TX`
`National Mall, Washington DC`


Not yet, I am working on getting that. And at the next meeting tomorrow, check all who are attending the November drilling event and get me a updated list afterwards ASAP. Since getting back from my first trip I have been very sick for nearly a week, still sick too, had to cancel this weekends trip sadly while the November event is hanging in the balance for me personally at the moment. Regardless on if I can make it or not I want to see as many of you lads out there as possible for the November drilling with the other western Networks.

Hey, is there an official packing list for the December event?


Gotcha has the gear list been passed out yet then or no, a lot of my lads are asking about it.

Leg pro needs to be painted antique white spray paint (2 coats) after being sanded to a matte finish to prep the surface for paint.


I'll be heading home after the festivities

I am, provided nothing forces me to do otherwise.


Hey Walter I forgot when the Thanksgiving get together is cause I don't write anything down.    Is it on Saturday the 20th?


alright, could you be in KC by 4PM Friday?


Evac Car:
We won't be able to have one follow us, roads will be too crowded and parking too limited. However, we can have one stationed at the mid point of the march to be ready in case. Maybe give three potential parking spots to vary between. Have any candidates in mind? I can find someone.

Medics will be on the side, behind screening shield teams. Standard march. Only breaking formation in event of need.

There will be water. Extra is always good.

Getting those mesh holsters for water bottles is a very important thing.

We need 4 medics who aren't already doing other things.

Notes from the medic meeting
Attendence 11/12/2021 - PF Medic Meeting
Mark MO - most of it
Adam PA - yes most of it
Steven TX - y
Samuel NJ - everything but white vest
Jesse CO - need to order kit
Adam IN - Don't have any. Can get some stuff

Ask thomas about evac car.
Food allergies and medical conditions. Ask for every network
Samuel NJ has asthma

Postions in formation?
Make sure fingers are clear in box truck.
Medical condition card, place in a uniform place?
Water in boxtrucks, include in event fee?
Camelback and water bottles
White vest

-Training Priorities
1) Wilderness - cheap and througough, applicable
2) BLS training
3) Wilderness First Responder
4) Red Cross First Aid

Samuel NJ - has boyscout first aid books
Jesse CO - Has Wilderness First Responder Books

At some point make our own curriculum


Give me a rough idea as to your main ideas or concerns. Things not covered in the information guide already.

There is alot of  misinformation, over simplification, and general FUD around the subject. I am fairly experienced with this so I thought I'd try to get a dialogue going.


Walter NC and I just placed 5 posters and about 30-50 stickers in downtown Smithfield and Carolina Premium Outlets

Link to those stencils you can project: https://mega.nz/folder/gA0mVQ6A#CCmSKPvYJlspQfxn_W-aAg


Does anyone have a fixit car computer reader they could bring to Edwardsville tomorrow?


What do you think of me getting a weight vest?

Haven't gone through those, kinda busy at the moment, but it seems ok from what I skimed through.


Can you bring some promat for me tomorrow? I'm all out.

I have to take some PTO time for a dentist appt next week which means I won't be able to make the Dec 4th event.


[ ](https://pf3618.bloodandsoil.org/channel/activism?msg=iKdCr2WmTrw2ope9C)  Smithfield, NC.


Great, thanks man. Looking forward to meeting you.


Even as they drink poison and woof down garbage they will know that America Lives and Marches On.


I'm sorry to hear your not feeling well, I hope you recover soon brother. We need you!

Not yet, I am working on getting that, recently asked about it. And at the next meeting tomorrow, check all who are attending the November drilling event and get me a updated list afterwards ASAP. Since getting back from my first trip I have been very sick for nearly a week, still sick too, had to cancel this weekends trip sadly while the November event is hanging in the balance for me personally at the moment. Regardless on if I can make it or not I want to see as many of you lads out there as possible for the November drilling with the other western Networks, it will be important practice for the upcoming December event.


So theres a Matthew CA in the Interview server, but not in our Regional Chat, Do you know anything about that?


And yes the rental is being worked on. Sorry been very sick recently, still sick too, so have not been as active on Rocket Chat.


Walter NC and I had a successful sticker/poster run. Placed 5 posters and 30-50 (maybe more) stickers around Downtown Smithfield and Carolina Premium Outlets in Smithfield.

@all In case you haven't heard - The drilling with SamVA got moved to next weekend due to a string of illnesses. We can get the renewed attendance at our next weekly meeting  :ok_hand: :thumbsup:


Gotcha has the gear list been passed out yet then or no, a lot of my lads are asking about it.


Yeah I am going to just meet up with john today

I'm unfortunately not free this weekend. John tells me he's free Sunday and part of saturday


https://twitter.com/4WPub/status/1458483351858388995

Old Dominion University might be a good place to sticker in light of this


Getting ready to go to Miami to climb with s friend and help get Ryan FL on his feet


He lives on severe poverty, no parents, no documents.


We have a returning member who knows him who is willing to house him so he can start moving forward with his life.


So I'm hoping to get him moved too if possible.


You remember ryan. Hes the short malnourished looking one at the drilling session.


@PF-785872 , you need to upload at lesst 4 photos.


Help him in every way you can. You’re a good man, Lawrence


we may actually be taking in a MO guy in over here


[ ](https://pf3618.bloodandsoil.org/group/nw8?msg=iE4SCPTQ2uMawZQ9k)  @PF-3194 what should be done in this circumstance to complete a weekly action? Would gathering those opposition banners count?


Nice. Our rule with guys like Ryan or Phillip FL (you haven't met him) is the second they stop trying to improve is when we show them out the door.


We'll help them as much as possible, but they have to do the work.


I’ve been on Andrew’s ass the past few weeks


I mean, He, Sean and Carter could be a SOLID trio in the B’ham area


I have too much promat. If they want some mailed to them I can send some.


The stencils are at my place and I’m gone


I’ve instructed all of them to assemble their own personal kits before months end.


Between Norman and me, we have stencils for everyone


that way, If someone is out of stickers, they can always stencil


also, I’ve ordered a projector to begin with banner construction


things are going to take off big in 2022 for AL


Just wanted to let you know I got my guys meeting up the weekend of the 20th for some last minute training.


He'll yeah, sounds good man. Things have been going great for us all year, let's keep that ball rolling


due to everyone’s conflicting schedules, we may have to conduct things individually as a state


Ya that’s what I kinda figured. I like the big group meetups but the logistical issues behind them are understandable. People’s livelihoods come first lol.


activism

@PF-785872 , you need to upload at lesst 4 photos.


Been getting back in the gym man. It feels damn good to be back. I joined planet fitness not realizing they have almost no free bar or crazy equipment lol. So it makes copying branch warrens workouts a little hard. But it’s kinda nice for getting back in to the swing of things. Least I can’t get to crazy and hurt myself right off the rip lol. Especially this close to the December event


[ ](https://pf3618.bloodandsoil.org/channel/activism?msg=kGnGebWcPorJh6ZA2) I needed to be quick, could only get 2


[ ](https://pf3618.bloodandsoil.org/channel/activism?msg=xYdrgT6CoJZeovAan)  Two is not enough for us to use on our promotional channels. If you only have time for two, no reason to take pictures.<br>Also, avoid promat on store shelves (or anywhere indoors).


Chin strap clicks onto your hat and bump cap.    Knee pads are sanded and spray painted.


[ ](https://pf3618.bloodandsoil.org/channel/activism?msg=k0FoRwUmIy4NVyu8R) Why do we avoid doing promat indoors?


Hey buddy I'd like you on my shield team for December


**SUNDAY 11-14 ACTIVISM**

`Location`
1 Washington St # 401, Wellesley Hills, MA 02481 at 12:00pm Noon.

`GEAR`
Clothing: All clothing items must be politically neutral, prioritize dull colors, absence of revealing marks or identifying features such as company logos, college icons, or city references.

Activism Clothing:
PF Hat with chevron patch
White gaiter

Additional Items:
All Stickers in possession
Mouthguard
Boxing Gloves (if in possession)
Drinking water

`WEATHER`
Clear skies. 50 Degrees. Sunset at 16:22.

NW03 Ben CO ?/?
NW11 Johnny MN :white_check_mark: Accurate as of 11-11-21
NW01 Thomas 13/14 :white_check_mark: 11-12-21
christopher AL 7/7 :white_check_mark:
James TX 6/8 + 1 :white_check_mark: Accurate as of 11-9-21
NW12 Carter MO  :white_check_mark: Accurate as of 11-12-21
NW07 Henry MA 9/13 :white_check_mark: Accurate as of 11-9-21


Oh its not specifically related to OPSEC insofar as activism within PF goes. I was just thinking I'd cover broader areas of computer and internet privacy.

Examples would include alternative operating systems for cell phones and desktop, encryption, creating an anonymous online identity, etc. Alternative apps which can be found outside google and apple stores which function just as well as their counterparts, and so on.

It's how to get away from the use of big tech services, avoiding the surveillance that using these services entail. Even though one might be doing all sorts of things to keep their IRL OPSEC top tier, the online and computer side of things people often are unaware of how or why to consider alternatives. I want to fill in some of those gaps.  Its just a chat in Mumble I promised some people I was going to have with them and I figured why not do so with as many of  our guys interested.

Give me a rough idea as to your main ideas or concerns. Things not covered in the information guide already.


I'll make sure to get ProMat out in Lieu of attending the trip


I wouldn't say I'm an expert but I am motivated... used to work in marketing. And had a stalker ex.

I'm not sure how much I can contribute but I support the effort. Do you have an outline of things you'd like to cover?


I can’t take the time off of work the day it’s scheduled


Alright. Understandable. I'll see you on Sunday.


**SUNDAY 11-14 ACTIVISM**

`Location`
104 W Pine St, Auburndale, MA 02466 at 12:40pm

`GEAR`
Clothing: All clothing items must be politically neutral, prioritize dull colors, absence of revealing marks or identifying features such as company logos, college icons, or city references.

Activism Clothing:
PF Hat with chevron patch
White gaiter

Additional Items:
All Stickers in possession
Mouthguard
Boxing Gloves (if in possession)
Drinking water

`WEATHER`
Clear skies. 50 Degrees. Sunset at 16:22.


Does anyone have a fixit car computer reader they could bring to Edwardsville tomorrow?


**SUNDAY 11-14 ACTIVISM**

`Location`
104 W Pine St, Auburndale, MA 02466 at 12:40pm
_Your location/time is different from others because your busy in the morning. If you have to be late to this location, that's OK_

`GEAR`
Clothing: All clothing items must be politically neutral, prioritize dull colors, absence of revealing marks or identifying features such as company logos, college icons, or city references.

Activism Clothing:
PF Hat with chevron patch
White gaiter

Additional Items:
All Stickers in possession
Mouthguard
Boxing Gloves (if in possession)
Drinking water

`WEATHER`
Clear skies. 50 Degrees. Sunset at 16:22.


Apologies for my absence, been not feeling so hot since NJP last weekend- seems everyone got sick to some extent or the other.  Loving the energy and progress in here, particularly from @PF-988985 !
@PF-2173 Check in dog
I have a killer case of bicep tendoinitis right now, can't really train hard or perform any barbell lifts and its driving me mad..gonna attack it with a super low carb (anti-inflammatory) diet, lay off the weights and finally join the muay thai gym so I don't lose my mind..hopefully the tendonitis and shoulder injury resolve soon so I can get back after it 100%

@PF-838443 you can improve cardio with swimming or anaerobic exercises. Jumping jacks, burpies, ect anything that raises your heart rate. Hell even working out without resting (only do this with light weight) helps cardio.


We will be meeting @
* 11AM tomorrow
We will be doing
* Postering
We are meeting at
* https://www.google.com/maps/@33.1906862,-97.1024215,20.25z
Which is a parking lot next to Bed, Bath, and Beyond located here
https://maps.app.goo.gl/4rW63gbWWv8xja2F8
The attendees are
* Lewis, Vincent, Austin, Oscar


@PF-3398 I need to know if you can dog sit for the December trip. I can't remember if you were going.


Hang on I was just told it’s being moved back


For me, it's just NW03 Ben CO. I sent him a follow-up message today. He said he has 6 people going + one unaffiliate. I asked him how many people total in his network. Still waiting to hear back.


Last minute fucking with the reschedule 😞


Vernon said that one would be good, we will most likely need to supply some chairs


@PF-626733 didn't you say you were also coming down?


That should not be tremendously difficult


@PF-2394 yes, i thought nathan needed it to be after 5pm?


You still up to do something this evening?


He does not. He currently lives with me, his temp agency is trying to find him a new job because he got laid off


And just to let you know, my family needs the big car the weekend of the bake sale. I might need to get picked up near my house. I do have another car but it’s unreliable and I don’t want to drive far with it


[ ](https://pf3618.bloodandsoil.org/direct/faoxSdnKgFNDJjxuW?msg=GKZiYrsovLGZjWrci) Oh, im guessing that is a recent development then. We all appreciate you going above and beyond again benjamin. Lets go with 5pm so eric can have a minute to chill aftet work. Let me know where i should meet yall down there


I can go to royal oak probably but I need to jump it everytime I start it


This will either be discussed later today or Monday


Hi Austin, do you mind giving me your threema? Mine is DA24CEE5


I am not, provided there are suitable roadways upon which to travel home.

I'll be heading home after the festivities


Thank you Billy! I have some money for you given to me by William. Its looking like I have to be in San Antonio for a few months, and there is a strong chance that I won't be available for this upcoming camping trip. Regardless I'm taking you up on that lunch offer before I go to Wyoming this summer


450 pieces of promat form Arthur. There would have been more but I went pretty HAM with his flyers in Charles Town WV last night.

Can you send the link on telegram? More tech frienely


Anyone tryna squad up to throw some promat up this weekend?


Hey just confirming; you sent that letter out right?


the manufacturer is Ergodyne, i think the same company who makes the gray ones we've been using. strangely they do not seem to offer this version by itself, it is sold with a hat.
https://www.ergodyne.com/skullerz-8950-bump-cap.html
I've only seen it sold individually on Ebay. I let a few NDs know about it so they can suggest it to their networks as they see fit. I like it

See if you can find it on the manufacturer's website or see if there are other options for the same model.


Do you have new shields in your possession?


Doing a quick scout around the place then heading to the Meetup spot


My bad I meant the general gear list for the trip, not the shield stuff.

Chin strap clicks onto your hat and bump cap.    Knee pads are sanded and spray painted.


Matthew CA is now Matthew MN. He was part of Network 14 while going to school in SoCal a long while back. Upon completion of his schooling he moved back to Minnesota.

So theres a Matthew CA in the Interview server, but not in our Regional Chat, Do you know anything about that?


Nvm about that. I’ll have the reliable car that weekend. Had to do a little bit of lying lol


Yeah, approximately. We might be done a little sooner


😮💨 thank God, I'll be sure to cover most of the gas money for you


I have no shields in my possession; how was the exchange with Arthur, was he chatty?


@thomas can you post network/cluster map please

oversight

[ ](https://pf3618.bloodandsoil.org/group/oversight?msg=zg9dNshbKL7LwDBMr)  Lol


It was okay. a little awkward. he seemed to feel the need to explain himself or justify his choice to me. He mentioned the Gideon thing. I wanted to be like, "Bro, Gideon sounded based. Lets go smash some idols together" but idk. I just noticed it was hard for him to look me in the eye. Im not sure what his situation is, but I think he does feel bad about leaving. but at the same time if you have a moral problem with covering up a George Floyd mural then you're probably not a good fit for PF.


Seeing the size of those I might as well take Portland and Spokane into my network


However not the reason I needed it, just want a better bearing on where everything and everyone is at mapped in my head. Thank you Sam. Looking forward to an updated one with NW8 on it 👀:betsy:


Official NWX borders going further into PA would be pretty cool too


Hes smart enough to realize that he's choosing what's easy over what's right, and he's got enough of a conscience that it lsnt an easy move


He does have material conditions which are inhibiting him to an extent but at the end or the day he makes his own choices we can't make it for him.


[ ](https://pf3618.bloodandsoil.org/direct/faoxSdnKgFNDJjxuW?msg=pRHrdovcQgWa64wN3) Yes it is. And 5pm it is, ill get Eric. I'll also just need to know where to go

[ ](https://pf3618.bloodandsoil.org/direct/faoxSdnKgFNDJjxuW?msg=GKZiYrsovLGZjWrci) Oh, im guessing that is a recent development then. We all appreciate you going above and beyond again benjamin. Lets go with 5pm so eric can have a minute to chill aftet work. Let me know where i should meet yall down there


I appreciate it. Sorry for that. They said I canhave the car for the whole time now so we’re good


I have my tickets purchased however I am in some legal trouble.


All good. I’ll need a ride from and to home tho


I might not be able to make it, my arm hasn't gotten any better in the last couple days


It's at the point where I can't drive for long amounts of time


Thank you Billy! I have some money for you given to me by William. Its looking like I have to be in San Antonio for a few months, and there is a strong chance that I won't be available for this upcoming camping trip. Regardless I'm taking you up on that lunch offer before I go to Wyoming this summer


Shit :( I was going to ask you to drive Marshall


You can take the fitness/sparring portion extra light if you have to. Other than that, we'll be doing a banner drop and stickers so it shouldn't be too tough on your arm.


I'm going to see if Bill can pick you up. I'm talking to him now


Is the vetting server down? I'm getting a host error message


I definitely can't be climbing any fences


I'll let you know if it feels better tomorrow


That's fine. We should have decent sized groups so you can record or something like that.


Doing a quick scout around the place then heading to the Meetup spot


Yeah if I do come I'll be on camera duty


Also, we won't need to climb anything for these drops


Let me know if you'd like my Threema ID/Telegram/Cell number, in case anything comes up and we need rapid comms


My bad I meant the general gear list for the trip, not the shield stuff.


I appreciate it. Sorry for that. They said I canhave the car for the whole time now so we’re good


[ ](https://pf3618.bloodandsoil.org/direct/faoxSdnKgFNDJjxuW?msg=pRHrdovcQgWa64wN3) Yes it is. And 5pm it is, ill get Eric. I'll also just need to know where to go


Yeah I was gonna go out and hit 2 towns after my workout last night but as soon I hit the bench press my arm started burning and I had to cancel that


Went home and just sat in pain for an hour


Leaving soon, keep me posted; threema ID is C7SSEAE2


Do you mind if I post this in the PF medic chat?

Evac Car:
We won't be able to have one follow us, roads will be too crowded and parking too limited. However, we can have one stationed at the mid point of the march to be ready in case. Maybe give three potential parking spots to vary between. Have any candidates in mind? I can find someone.

Medics will be on the side, behind screening shield teams. Standard march. Only breaking formation in event of need.

There will be water. Extra is always good.

Getting those mesh holsters for water bottles is a very important thing.

We need 4 medics who aren't already doing other things.


[ ](https://pf3618.bloodandsoil.org/channel/activism?msg=D73AakhD7KBj88BfB) Salute this man!


Can you share the stencil typeface? i'm working on a comp of for a stencil design with the "join-or-die" segmented snake design

the manufacturer is Ergodyne, i think the same company who makes the gray ones we've been using. strangely they do not seem to offer this version by itself, it is sold with a hat.
https://www.ergodyne.com/skullerz-8950-bump-cap.html
I've only seen it sold individually on Ebay. I let a few NDs know about it so they can suggest it to their networks as they see fit. I like it


Matthew CA is now Matthew MN. He was part of Network 14 while going to school in SoCal a long while back. Upon completion of his schooling he moved back to Minnesota.


@all Reminder for tonight's Mumble meeting at 7:00pm.

Planning, Cooperative Meetings, Coordinated Actions, Connectivity, Communication


I'll be bringing all the promat to distribute it all


The event I am referring to is in December bud


I’m going to get a covid test today been running a low grade fever the last couple days so I’m probably not doing anything this weekend. It’s probably just a cold. I did get my vehicle out of the shop finally.

[ ](https://pf3618.bloodandsoil.org/group/nw_3?msg=jHdD9sWkPPAg7REjQ) He said weekend of 11/19 in my dms so assuming so :thumbsup:


Do you have to make an appearance on one of those dates?

I have my tickets purchased however I am in some legal trouble.


I'm going to see if Bill can pick you up. I'm talking to him now


Can you share the PF stencil typeface? i'm working on a comp of for a stencil design with the "join-or-die" segmented snake design


@PF-535860 , @PF-9412 , @PF-5463 , @PF-4354 , and @PF-4346 have not completed their weekly edits. We have until Suday to meet our individual quotas


Eric, just to confirm, I should post my promat pictures in the activism tab as a group of 4, and I should also post them in our network group?

Yes for the 20th, tentatively for the 4th with a more definitive answer to follow in the next week hopefully.


I won't be able to this week. I'm stuck in a man camp in New Mexico for work. Internet is hard to come by.


I only have 2 units of kale right now, I will be planting arugula and spicy salad mix today so if you want to try some of that it'll be ready by next Sunday.


Just post one of the 4 photos in the network group


I met with Interviewee-219169 and I approve of his acceptance.


I met with Interviewee-219169 and I approve of his acceptance


Michael IN told me to let you and Thomas both know


For the thing tonight, I can bring some will2rise shirts if you guys want to wear them for promotion. Lmk. You’ll have to wear it over some type of long sleeve shirt


Got it, thank you. Also, for the jacket, I should get blue correct?


Meetings happen every thursday evening. I'll put out more reminders next time to help.


5 niggers are on the run and are dangerous. Stay safe Georgia bros